The PHOTON CAP fNIRS system weighs about half a pound (less than 230 grams) and can be worn effortlessly on a subject’s arm or chest while collecting data with its set of 16 sources and 10 detectors. Its ultra-compact design was a key factor in its...

Accessing actiCHamp (Plus) data within less than 1.5 ms

The Quick-32r is a complete rethinking of the capabilities of a dry EEG headset. With industry-leading signal quality, built-in noise rejection, long-term comfort, enhanced usability, and a unique built-in LED impedance indicators for real-time cont...

BESA MRI is software to generate individual head models (BEM / FEM) that can be used for EEG and / or MEG source analysis.

Whether you are aiming for unlocking mechanisms of brain connectivity and function, or for enhanced diagnostic use on epileptiform data, BESA Research 7.1 will help you to achieve your targets reliably and with more pathways than ever before.

As part of the new sensor generation, the EdaMove 4 takes the proven quality of the EdaMove 3 and incorporates the most sought after improvements from extensive discussions with researchers in the field.

movisens is proud to be the first company to provide a sensor trigger for Experience Sampling and Ecological Momentary Assessment studies

The LightMove 4 opens new possibilities for researchers who understand the interplay between light and physical activity, allowing their research to expand and contribute to this growing body of knowledge.

The EcgMove 4 strengthens it's position as the go to device for researchers who care about high quality ECG and Activity data.

SIGGI-2 is a lab tool with parameters in the micro-volt range.

This cap is equipped with actiCAP SNAP holders for the actiCAP slim electrodes, for use with the actiCAP / actiCHamp system.

The BrainCap for Sleep is a complete cap with built-in electrodes for EEG, EOG and EMG recordings, optimized for sleep recording situations.

The unit can be pre-calibrated and sealed. All the user does is to point the unit at the action.

The CX1 combines three motion sensing arrays into one unit. This allows a standalone CX1 unit to make a complete 3D measurement without reference to any other units.

A MiniHub provides power and data connections for one or two CX1 or CXS units.

A central control unit from a Codamotion system with combined power and data connections for up to eight CODA sensor units.

Whilst the ODIN software provides an easy-to-use graphical interface for movement analysis, it is often the case that computer programmers, engineers, and systems integrators need to work directly with 3D measurements in real-time. 

The ODIN software platform is familiar to movement analysis researchers, clinicians, and biomechanists around the world.

Every Codamotion unit is pre-calibrated in the factory to measure coordinates in 3D and in real-time, with fully automatic marker labelling programmed into the hardware.

MREyes is a novel solution that allows operators to see, and to record, a clear view of the subject’s eyes. This can be used in applications as simple as verifying if the eyes are open or closed, or in watching alertness or changes in gaze.

The Transcranial Focal Stimulator is designed to be compatible with our unique concentric ring electrodes.

The outer ring and the center disc are used for delivering focal stimulation.

The t-Interface serves to configure the TCRE electrode elements, route, and pre-amplify the signals.

The TCRE performs the Laplacian automatically and takes bipolar differences of the surface potentials from its three closely spaced electrode elements.

The Dev Kit includes everything you need to undertake EEG experiments and custom hardware development: an 8-channel amplifier, inputs for CGX dry electrodes and ExG’s, and a headband for mounting dry electrodes.

Our newest amplifier has 20 channels and is small enough to fit in your hand. Amplifier includes standard DB-25 connector for use with off-the-shelf wet caps.

Connect to eye trackers and other recorders without the need for software or algorithmic timing compensation.

The AIM Physiological Monitor is a compact, sophisticated unit that adds heart rate, temperature, respiration, GSR, PPG/HRV/SpO2 and more to any EEG system.

A quick-install wet-cap based system with active electrodes in a standard 10-10 (64-Channel) or 10-5 (128-Channel) configuration, all with a detachable amplifier for the freedom to conduct even the most demanding experiments.

The Quick-20r v2 is a complete rethinking of the capabilities of a dry EEG headset. With industry-leading signal quality, active electrodes for unparalleled noise rejection, long-term comfort, enhanced usability, and a unique on-board impedance check...

The Wireless Trigger provides a fully mobile solution for recording event markers in EEG data.

The USB 2 Adapter (also known as BUA) serves as a USB interface to connect any BrainAmp amplifier with the recording computer.

The TriggerBox helps to handle and merge triggers arriving from different sources, which is quite often a requirement in complex laboratory setups.

A must-have solution designed to boost data quality for concurrent EEG and fMRI recordings

StimTrak combines creativity and precision, making it a very versatile tool which is destined to become a must-have for any kind of laboratory.

Non MR compatible sensors for peripheral signal recordings

To meet the demands of our customers we are continuously working on developing sensors with the capability to measure peripheral physiological signals in addition to EEG in the MR scanner.

MR usable sensor for parallel respiratory measurements

The Brain Products Respiration Belt is used to measure the thoracic or abdominal respiratory movements.

BrainVision RecView is an advanced solution designed for real-time analysis of data received over the Ethernet network via TCP-IP directly from BrainVision Recorder.

The new BrainVision Video Recorder Kit uses a high-resolution network camera, integrated with BrainVision Recorder to provide you with excellent synchronization of your video and EEG recordings.

BrainVision Recorder is a multifunctional recording software designed to provide our amplifier customers with an extremely versatile and easy-to-use platform for recording setup and execution.

The R-Net is based on saltwater sponges and passive Ag/AgCl electrodes that are held in place with a durable and flexible silicone structure.

Rechargeable battery to be used in the lab and the MR environment

The Photo Sensor is a valuable tool to check the performance of a monitor or any experiment control software. This becomes essential if visual stimuli are planned to be presented on a tablet or cell phone display.

The wireless MOVE is a solution that replaces the existing cables connecting electrodes and amplifier with wireless-based communication.

The LiveCap is a fully customizable cap, especially designed for use with LiveAmp amplifiers to provide a highly comfortable mobile EEG recording solution.

Combining the LiveAmp with the LiveAmp Sensor and Trigger Extension (STE) makes it possible to add additional physiological signals to your mobile EEG research.

The LiveAmp is a wearable, 24-bit amplifier - available with 8, 16, 32 and also with 64 channels. As it is wireless and allows you to store your recorded data internally (i.e. on an exchangeable memory card), there are no mobility limitations.

With the LiveAmp 64, you can record high density and high-quality EEG without mobility limitations.

LabSim is a small and handy signal generator, able to generate signals required to test the input ports of different amplifiers.

Add this valuable accessory to your already existing BrainAmp ExG MR amplifier and record GSR of laboratory-standard quality even during functional MRI!

The EP-PreAmp can be used virtually for any scientific application benefiting from simultaneous measurement of EEG & (up to 16) bipolar signals carried out with a low noise preamp.

CapTrak is a light, hand-held scanner equipped with two integrated cameras and an intuitive, easy-to-use software for fast electrode localization.

This solution allows the TMS coil to be placed very close to the scalp and elicits the evoked response with low magnitude stimulus.

Superior solution for combining EEG & fMRI

The BrainCap MEG is a complete configured cap with built-in electrodes for EEG Recordings with simultaneous MEG.

The BrainCap makes the preparation time very fast and assures high subject comfort as well as high-quality data recordings.

The BrainAmp ExG MR bridges this gap and makes the recording of bipolar and polygraphic signals in the MRI environment a simple procedure.

The first BrainAmp MR amplifier for EEG/fMRI simultaneous acquisition was manufactured by Brain Products more than a decade ago and represented a real technological breakthrough.

The BrainAmp amplifier is a compact solution for neurophysiology research that can be combined with other units within the same product family to cover a vast range of possible application areas.

The standard in combined EEG & fMRI recordings

The BrainAmp ExG amplifier is a bipolar amplifier which can be used to record EMG, ECG, EOG and polygraphic channels such as GSR (Galvanic Skin Response), acceleration, temperature and blood pulse with an extremely compact design.

The BrainAmp DC includes all the outstanding features of the BrainAmp amplifier with the addition of the DC recording mode as well as with multiple hardware filtering options.

The BIP2AUX Adapter is a tiny, analogue differential DC amplifier that amplifies the incoming signal in order to make it measurable and relays it through the auxiliary input ports of the V-Amp and the actiCHamp.

In order to make it easier and more convenient to evaluate our software solutions for EEG/EP recordings and analysis we are introducing a new trial concept, the so-called "Application Suite Trial Package".

The analysis software for EEG/ERP research

The actiCHamp Plus can be combined with all our active as well as passive electrode systems - incl. the R-Net, and is powered by a sturdy lithium-ion battery, the PowerUnit.

actiCAP Xpress Twist: dry, fast & comfortable

The actiCAP is the go-to solution for reliable and flexible high-quality EEG recordings.

MR usable sensor to capture movements in 3 dimensions